Rancho Quick Lift Rear Kit

Topics relating to Lift Kits, Suspension, Steering...

Moderator: volvite

User avatar
stowerspowers2
Posts: 14
Joined: Sun Sep 17, 2017 1:39 pm
Location: Atlanta

Rancho Quick Lift Rear Kit

Postby stowerspowers2 » Fri Sep 27, 2019 6:07 pm

Anyone have the entire Rancho quick lift system installed? (The front loaded struts and rear coil spring spacers and new shocks) I had a question about the rear spacers. I saw a video on youtube where a man removed the insulator/rubber piece at the bottom of the spring and replaced it with the spacer. The Rancho instructions (which aren't typed very well) say to place the spacer at the top of the spring. I plan to do the install tomorrow and was just wondering what others have done. Should I put it at the top? Is there an rubber insulator at the top of the spring as well? Should it be removed and replaced by the spacer? Or used along with the spacer? Any advice would be appreciated, cheers.


User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Sun Sep 29, 2019 8:49 pm

I put mine on the bottom of the springs with no problems

User avatar
stowerspowers2
Posts: 14
Joined: Sun Sep 17, 2017 1:39 pm
Location: Atlanta

Postby stowerspowers2 » Mon Sep 30, 2019 10:31 am

Did the lift the other day and ended up putting them on top. Hopefully it doesn't matter where you put em


Return to “R51 Suspension and Steering”