3000 RPM stutter

Attack of the unibody snatchers! Styling and handling refined or bland? You decide.

Moderator: volvite

AlbertoCastillo
Posts: 2
Joined: Sun Apr 04, 2010 8:56 pm

3000 RPM stutter

Postby AlbertoCastillo » Sun Apr 04, 2010 9:21 pm

Hey everyone!, I recently bought a 2003 Pathfinder SE and love the car, only problem is every time I ask for power and reaches 3000RPMs it starts stuttering and will not let it rev up anymore (like if it cuts-off), it wont give me power I want or need... any suggentions would be greatly appreciated! thanks


fleurys
Posts: 288
Joined: Tue May 12, 2009 5:03 am
Location: Ste-Catherine, QC
Contact:

Postby fleurys » Sun Apr 04, 2010 9:31 pm

This sound alot like a MAF sensor issue. 2001-2003 (fixed in 2004), have had a chronic issue with this sensor. It is not cheap, so you want to make sure it is that.... You should have a check engine light on.... do you ??

If you do, get the code out ( from a reader or a garage), then you'll have something to go from.

bucata206
Posts: 16
Joined: Sat Apr 10, 2010 8:32 pm
Location: Bremerton, WA

Postby bucata206 » Sat Apr 10, 2010 8:35 pm

I have the same issue in my 97. I didn't know what it was but it makes sense that it's my MAF sensor. My mechanic put a OBD2 scanner on it and it showed that the MAF sensor was bad.

fleurys
Posts: 288
Joined: Tue May 12, 2009 5:03 am
Location: Ste-Catherine, QC
Contact:

Postby fleurys » Sat Apr 10, 2010 8:49 pm

Now if you do not have a problem with the near 500$ maf for the pathfinder, then go ahead and change it (mine has ben changed for a 2004 model).... if not , many have been sucessful with the procedure of using a maxima maf which has the same engine. About 300$ less... everything is here : http://npora.ipbhost.com//index.php?showtopic=12280

Flyby
Posts: 2
Joined: Wed May 12, 2010 10:05 am
Location: Vancouver, BC

Postby Flyby » Wed May 12, 2010 11:24 am

I'm having the same issue with my 1998 as well and have been searching for a solution. My available power noticably drops at 3100rpm but then picks up again around 3600. Occasionally I'll have have a bit of hesitation at different speeds as well though, usuall when the engine is cold.
I replaced the right side catalytic convertor and that was when I started noticing the issue. I do have engine codes but don't have them on hand at the moment.
Someone suggested that I check my o2 sensors but I haven't had the chance to do that yet.

User avatar
thepoPEye
Posts: 17
Joined: Tue Apr 13, 2010 4:55 pm
Location: Clearfield, Utah, U.S.A.

Postby thepoPEye » Wed May 19, 2010 8:45 pm

autozone has MAF for around $180 if ya got one near ya thats the best price on a new one iv found

AlbertoCastillo
Posts: 2
Joined: Sun Apr 04, 2010 8:56 pm

CODE P1130

Postby AlbertoCastillo » Tue Jun 01, 2010 5:23 pm

I passed by the mechanic and hooked up the computer and came up with CODE P1130 : manufacturer control air fuel metering. I dont know if anyone knows about this....?[/code]

Tele4Mongo
Posts: 15
Joined: Sat Jun 26, 2010 6:09 pm
Location: Houston

Postby Tele4Mongo » Sun Nov 27, 2011 6:03 pm

I passed by the mechanic and hooked up the computer and came up with CODE P1130 : manufacturer control air fuel metering. I dont know if anyone knows about this.

I have the same issue with the P1130 error code. Alberto, what solved your issue?

Thanks

wnadrag
Posts: 13
Joined: Sun Nov 06, 2011 6:39 am
Location: Cape Cod

Postby wnadrag » Thu Dec 01, 2011 5:51 pm

I just replaced my MAF on my 2001 because I had the same problem. Took a shot and bought one of the hundreds being sold on ebay new for $50. So far it works just fine.

Tele4Mongo
Posts: 15
Joined: Sat Jun 26, 2010 6:09 pm
Location: Houston

Postby Tele4Mongo » Tue Dec 06, 2011 8:36 pm

See my P1130 post. TPS was the issue.

The Red Path
Posts: 2
Joined: Tue Feb 07, 2012 10:09 pm
Location: UTAH

Postby The Red Path » Tue Feb 07, 2012 10:45 pm

yeah my 97 has the same problem 3100 rpm and it just cuts out up till 3600 rpm and i dont know whats causing it, I have no SES lights and my scan tool shows no codes so, should I just change my MAF sensor anyways?

04LEson
Posts: 9
Joined: Mon Sep 05, 2011 9:19 pm
Location: East Coast

Postby 04LEson » Sun Mar 04, 2012 4:28 pm

I had the same problem on my 04 pathfinder. i was afraid it was from the k&n intake i put in but try cleaning your MAF. you can get some crc maf cleaner at autozone for like 7 bucks. It helped for me


Return to “1996-2004 Pathfinder (R50)”